|
|
|
 |
Slashproof Security Shoulder Strap The PacSafe CamSafe 200 Security Camera Bag is the only camera bag on the market that features a heavy duty anti-theft security strap that allows the CamSafe to be carried over the shoulder or by hand. The CamSafe 200 slashproof security strap features steel wire cables woven into the entire length of both sides of the strap. These steel wires make the strap slashproof, additionally, these straps provide extra strength and support of the CamSafe 200 bag. The shoulder strap is fully adjustable so it can be worn over the shoulder or around the waist. The strap can be extended for a full hang length of 28 inches, or shortened to 16 inches. When the strap is worn around the waist, the combination lock prevents someone from unhooking the strap from behind and taking the case. The strap is 1 ½ inches wide and covered with nylon web material. |
CamSafe 200 Combination Lock Prevents Bag Pilferage and Theft
The security strap features a built-in 3 dial metal combination lock which is permanently attached to the strap with a steel "D" ring.
The CamSafe combination lock is used to secure the bag to a fixed object such as a chair, pole, car seat track, or desk.
The lock can also be deployed without using changing the combination, allowing the bag to be temporally attached and removed.
 |
This snatch-proof feature is commonly used you need to set down your for a short moment such as at an outdoor café table or, coffee house. If you need to leave your CamSafe alone, for a longer period of time such as in a hotel room, you set combination for additional security. See the end of this product page for additional information of the lock functions. |
CamSafe 200 Organizational Features
The CamSafe was designed to provide numerous storage options that any photographer will enjoy.
Main Compartment
The main compartment is covered by the bag's top dual zippered cover which opens to the rear for easy access and added security.
The cover also features a nylon overlap which conceals the zippers and zipper tracks from view, as well as providing additional protection from unzipping the cover by accident.
Once opened, the main compartment is padded, and designed to hold a large digital camera with the lens attached. The internal height of the camera compartment is 7 1/2 inches, which accommodates a typical digital camera with an attached 3 inch lens. If you wanted to separate the lens, the following is a typical camera configuration that fits: One one side a Nikon D300 and the other would be the matching 18-200 lens, or another would be a Nikon D40 with Sigma 10-20 lens on the other side.
The main compartment is divided into two sections, one for the camera, and the other for additional camera lens. The camera and lens are separated by a removable padded divider. Typically the main compartment is 9.8 inches wide, but the material can be expanded a little more if needed. Of course the main pocket is separated by a soft divider which is held in place by Velcro.
An additional divider piece is included to provide a cover for one of the main pockets to allow for double storage of that section if needed.
Additionally, sewn into the side walls of the main compartment are two cloth covered, elastic banded slip pockets These pockets are 6 1/2 inches deep and 4 1/2 inches wide.
|
|
The diagram to the left shows a display of the typical items that the CamSafe 200 would fit. |
Internal Memory Data / Battery Storage Pocket
Sewn into the inside top area of the main compartment is a zippered compartment designed to hold multiple memory cards and or batteries. The pocket 11 inches long, and 3 inches tall. Sewn into the entire length of the pocket are 4 elastic slots, each 2 inches tall by 2 inches wide.
CamSafe 200 Front Storage Pocket
The front pocket of the CamSafe 200 Security Camera Bag is a zippered pocket that provides quick access to frequently needed items by keeping them arranged in a variety of specialized compartments including:
- (2) wide, slid in pockets - each being 4.5 inches wide, by 5 inches tall
- (1) medium size slide in pocket 4 inches deep by 2.5 inches wide.
- (1) clear laminated, zippered pocket, 3.5 tall, by 6 inches wide
- (2) pen holder
- (1) key clip
CamSafe 200 Rear Pocket (worn against body) and Carrying Handle
This pocket is designed as a map pocket. It holds items 8 inches tall by 10 inches wide. It features a Velcro closure. On top of the pocket is a built in 1 inch wide by 8.5 inch long nylon web carrying handle. The below photo was shot from the top looking down into the pocket.
  |
|
|
PacSafe CamSafe-DISCONTINUED |
PacSafe CamSafe |
.jpg) |
|
| Close up of the CamSafe Combination Lock | CamSafe Mesh Pocket |
|
|
|
| CamSafe Accessory Slots | CamSafe Zipper Lock |
 |
|
| CamSafe Key Clip inside front pocket | CamSafe Side Mesh Pocket |
Comfortable - Non-Slip Shoulder Pad-Removable
The CamSafe 200 Security Camera Bag features a comfortable shoulder pad. It is 8.5 inches long and 3 inches wide. On the contact side is a non-slip, perforated rubber pad. Inside the pad is 1/2 wide high density foam core. The pad can be easily moved to any part of the strap, or completely removed if desired. It is held in place by 5.5 inch Velcro strip sewn into the reverse fabric side of the pad.
|
|
|
| Bottom View Non Slip Surface | Top View with velcro cover |
- Fully padded main compartment with adjustable/removable padded dividers and 2 internal slip pockets
-
Zippered main compartment opens to the rear for easy access and added security
-
For convenient access to camera, Velcro tab under main compartment flap attaches inside back pocket
-
Mesh pocket under the front flap
-
Front zippered pocket with 3 electronic gadget pockets, 1 laminated mesh slip pocket, 2 pen holders, and 1 key clip
-
Rear slip pocket and carry handle
-
2 side water bottle pockets
CamSafe 200 Specifications
- Materials: 400D nylon, banlin, high-tensile stainless steel wire.
- Dimensions of CamSafe 200: 12.5 x 9.8 x 6.6 inches / 32 x 25 x 17 cm
- Colors: Black with silver liner or Olive with taupe liner.
- Model Numbers: PD001BK (Black with silver lining) PD001OL (Olive with taupe lining)
- Materials: 400D nylon, banlin, high-tensile stainless steel wire
- CamSafe 200 Volume: 9 L / 549 in
- CamSafe 200 Weight: 2 lbs / 900 g
- Strap Length Max: 150 cm / 58.5 in
- Strap Length Min: 92 cm / 35.9 in
Comparison Chart
The CamSafe is available in two different sizes. The below comparison chart provides the differences between the two. To visit the CamSafe 100, click here.
CamSafe 200 2 which are 4 inches wide
CamSafe 100
Height
9.8 inches
12.5 inches
Width
6.6
6.6
Tall
8.2
9.8
Weight
1.7 Lbs
2 Lbs
Volume
4 Liters - 244 inches
9 Liters - 549 Inches
Strap Length Max
58.5 in
58.5 in
Strap Length Min
35.9 in
35.9 in
Security Features
Same
Same
Front Organization Pocket
Slide-In Pockets
2 which are 2.5 inches wide
1 which is 2 inches wide
Zippered Clear Pocket
3 inches by 6.5 inches, not zippered, clear slide in
6 .5 inches by 4 inches - zippered
Pen Holders
1
2
Front Mesh Pocket
7 x 5 inches
10 x 7 inches
Front Mesh Slots
3
4
Main Compartment
Depth
7.5 inches
9 inches
Wide
9.8 inches
12.5 inches
Camera -Lens Compartments
2 with one divider
3 with two dividers - due to extra height, the 2nd divider
allows items to be stacked on each other
Internal compartments
2 slide in 4 x 4 inches
2 slide in 5.5 x 4 inches
Memory/Battery Compartment
Not Included
11 inches long, and 3 inches tall. Sewn into the
entire length of the pocket are 4 elastic slots,
each one being 2 inches tall by 2 inches wide -
ideal for memory cards or extra batteries.
Rear Pocket
Size
8.5 x 6 inches
8 x 11 inches - large enough for maps, book, or other larger flat items.
Shoulder Strap
Shoulder Strap
Nylon Strap Only - NO PAD
Includes removable shoulder pad
| Customers who bought this product also purchased |
|
 | ||||||||||
|
||||||||||
|
||||||||||
|
|
Corporate Travel Safety is your destination for unique travel accessories and travel gear. |
|
|||||||||||||||
