Snatch-proof quick release connector for looping strap around a fixture
Comfort neck pad
Attaches directly to camera or other equipment
PacSafe CarrySafe 100 Camera Security Strap
The CarrySafe 100 is security camera neck strap that combines comfort and two anti-theft security features to help you provide security for your camera, camcorder, or binoculars from “cut and run” thefts. This camera security strap increases the protection of your expensive camera when walking in a crowded area. An environment favored by professional thieves.
Watch a quick video on the PacSafe CarrySafe 100 - Click below photograph
Security Features
CarrySafe 100 Slash-Proof Steel Reinforced Strap
Slash proof camera security straps were designed for people who value their camera gear. Many photographers (especially those who travel internationally) are keenly aware of the slash and run thieves in crowded tourist areas. In some parts of the world it is common for thieves to slash straps from the rear of their victim while simultaneously yanking down the and running away with the camera.
That’s where this security strap comes into play. Sewn into the camera security strap are the two slash-proof, high tensile stainless steel wires which run through the entire 60 inch length of the strap. These wires make the strap nearly cut-proof.
Embedded into the strap are 1.5 mm, 7x7 high-tensile stainless steel wire (seven strands and each strand comprises of seven wires) which are woven between the top and bottom layers of the entire length of the strap's outer material. While this steel wire camera security system is strong, it remains flexible enough so it is not detectable or uncomfortable.
Snatch-Proof Security Feature
The CarrySafe 100 camera security strap features the innovative snatch-proof security feature.
On each end, the camera security strap has user-friendly quick-release connectors which allow the strap to hook around a secure fixture to prevent theft when not around your neck.
This feature is useful when you don't want to wear your camera while dining or doing something else. You simply loop the security strap around your chair or table and back onto the camera. Now your camera is connected to the chair or other item. If an opportunistic thief were to grab the camera or strap, they would be stopped by the chair.
CarrySafe 100 Camera Connectors
Most standard camera straps have simple webbing straps which just loop in and lock with a plastic anti-slider, which is a source of many cameras falling to ground and/or becoming easily undone by sneak thieves.
The CarrySafe 100 incorporates a “camera connector security system”. The security features of camera connectors are as follows:
The webbing that connects the camera to the strap was improved to a new stronger “belt-like” webbing design. A great “user feature” is that the ends of the straps, the part that you would push through the camera's strap lugs, are cut in a triangular shape, making it much easier to attach them to your camera.
The CarrySafe 100 camera connectors are made of hardened zinc metal alloy and have a powder coated finish making them highly scratch resistant.
The newly engineered clips are spring loaded, quick-release type, and designed to prevent the camera from accidentally coming detached from the strap.
The connector features a "lock / unlock" latch on the D-ring, which is a feature not found on other straps. Many photographers say that this is a great feature not be overlooked.
This feature also allows the CarrySafe 100 camera security strap o be used as a shoulder strap for camera and other cases or carry bags with universal hook connectors.
Sleeve Cover Protectors
The CarrySafe 100 camera security strap also has two neoprene sleeve cover protectors (one on each end) which slide over the spring loaded anchor clips.
These protectors cover the camera strap quick release anchor clips from accidental opening by a passing object, or on purpose by the svelte hands of “sneak thieves.”
The hollow sleeves are four inches long and can be slid up and down the lower ends of the strap. The ends of the sleeves are elastic which allow for them to maintain their position when slid over the security connectors.
The detachable anchors on the CarrySafe 100 can also be used as shoulder straps for camera cases as well with universal hook connectors.
Comfort Neck Pad
A thick grip is stitched into the back of the neoprene strap. The comfort padded neck strap is designed with “breath-ability” vents, which help keep the neck pad dry from perspiration build up. The neck pad is 10 inches long and at its widest point, two inches wide (the neck pad is ergonomically shaped).
Adjustability
Each security camera strap has two slip adjusters which allow the camera strap to be adjusted up to 60 inches. Additionally, the camera connectors have slip adjusters which limits the amount of play between the camera strap connectors.
Material
The strap material is made from durable black nylon which is soft to the touch.
CarrySafe 100 camera security strap specifications:
Strap Length: Adjusts from 40 to 60 inches long (152 cm)
Width: 3/4 inch wide / 2 cm
Minimum Length: 104 cm / 41 in
Weight: 3.6 oz / 100 g
UPC No. 8833402385
Model No.2385 - Black
CarrySafe 100 camera security strap care instructions
Spot clean with warm water and mild detergent, air dry in shade.
Professional Photographer Reviews of the CarrySafe 100:
Read what professional photographer Steven 'Fish' Frischling said about the CarrySafe 100 secure camera strap - Click Here
The CarrySafe 100 camera security strap is recommended by Ferdinand Decena, a travel photographer and writer from the Philippines. Click here to see his review.
Slash proof camera security straps were designed for people who value their camera gear. Many photographers (especially those who travel internationally) are keenly aware of the slash and run thieves in crowded tourist areas. 
