Dodge Console Vault - A Steel Truck Safe for the Center Console of your Dodge Truck
"1 of out 3 people will have their vehicle broken into this year" US Bureau of Crime Statistics
(Select Your Console Vault Model from the Chart Below)
Police / Military / Government Discounts
Members of the armed forces, police, fire or government qualify for a special discount on Console Vault products. Just call us at 800-601-5711 and identify yourself by sending an email from your Department email account.. Single or multiple purchases can be made at that time.
Convert your Factory Storage Console to a Truck Vault – No Vehicle Mods Needed
These vaults have been engineered to fit perfectly inside your Dodge center console. Once you lock the Console Vault and close the armrest on your center console, no one will be able to see the vault in your car.
The installation of the Console Safe does not alter the original integrity of the vehicle. No part of the vehicle is cut, drilled, modified, or damaged in any way. Existing factory console bolts are removed and replaced.
Leased vehicles are not damaged in any way, and will allow the vehicle to be returned to the dealer in its original condition.
The Dodge Console Vault Truck Safe Provides Solid Bank Vault-Like Construction
The Console Vault was designed with bank vault technology in order to help protect its contents. The Console Vault is the only mobile safe on the market that features a unique three-point, high-security lock system that cannot be defeated, even if drilled. Some of the other security design features include:
Vault is made from massive 12-gauge, cold rolled plate steel and engineered like nothing else in the industry.
All joints of the Console Vault feature welded tab and notch seams which creates a fortress for your valuables.
Rear locking hinge pins, just like the ones used on bank vault doors.
"Triple Guard Lock System" - This is an exclusive three point locking system that resists prying even if the lock is drilled out.
Perfectly balanced spring assisted lid which makes the 12-gauge steel lid easy to lift open.
Console Vault weighs 13 pounds.
Videos of the Dodge Console Vault Truck Safe
The below is a short video of a Console Vault truck safe being installed in a 2006 Dodge Ram. Note that this type of installation is similar for most other large trucks and SUV's (other than those that only fit a Console Cover).
Triple Guard Lock System - Enhanced Security
Console Vault has recently made the greatest design improvement since the product was developed, the "Triple Guard Lock System" incorporates a latch design like the pins in bank vault doors which greatly increases overall security.
This design also includes a front channel which incorporates the lid into the body of the vault, the concept also eliminates all stress off the physical lock itself. This is the finest, most secure product Console Vault has ever made.
Know you Seating Configuration!
This photo depicts the Console Vault mounted in a Dodge Ram Pick-Up truck, inside the under seat console.
Note that the Console Vault is not visible to someone lookng inside the vehicle.
This shows the Dodge Pick-up truck with the lower console seat pulled up, showing the Dodge Console Vault securely mounted inside the well of the seat console.
Note that the Dodge Console Vault mounts totally flush with the OEM console tub, to maximize the space available to you.
Photo shows the Dodge Console Vault with the lid opened.
Security Features of the Dodge Console Vault Truck Safe
Massive 12 Gauge, Cold Rolled Plate Steel
Welded Tab and Notch Seams
Superior Five-Point Lock System, Resists Prying
Exclusive Lock Cam Prevents Entry Even If Lock Is Drilled
High Security Lock Option-- Key or Combo
Perfectly Balanced Spring Assisted Lid
Bolts to vehicle with existing bolts, no drilling necessary
Dodge Console Vault Secures Valuables in Your Vehicle
Wallets and/or purses
Money and credit cards
Vehicle registration (identity theft)
Secure piano style hinge
Underside of the piano style hinge inside console vault
High Quality Lock Security
Each Console Vault includes the following lock security features:
High security barrel lock – with a dimple key design makes key duplication nearly impossible.
Includes two security vault dimple keys (difficult to copy or pick).
Optional three dial combination lock available so you don't have to worry about lost keys
Exclusive lock cam prevents entry to Console Vault if lock is drilled.
Bank vault style locking pins just like the ones used on the bank vault doors.
Interior Console Vault Features
The interior of the Console Vault is generously sized to accommodate items in various sizes and shapes. Additionally, the Console Vault includes a storage shelf for smaller items, along with a fabric-foam based liner.
Security Latch Inside the Dodge Console Vault
Dodge Console Vault Combination Lock
Console Vault Truck Safe Finish
Each Console Vault is finished in the factory with an industrial grade, high-quality powder coat finish that looks like paint, but acts like armor. For those who are unfamiliar with powder coating, it is basically a dry finishing process used to apply paint to metal surfaces.
The Console Vault is then placed into a curing oven and the covered with finely ground dry powder of colored pigment and resin.
While inside the oven, the Console Vault is electro-statically charged. This process causes the powder sprayed on the vault to melt and fuse into a solid coating on all of the vault's metal surfaces. The end result is a tough, good looking, scratch resistant finish.
Easy No-Drill Installation
Installation is done in 10 to15 minutes, using simple hand tools. This turn-key easy installation allows almost anyone who can turn a screwdriver to self install the Console Vault. Why pay a car dealer or other after-market installation company costly installation fees?
How to Install the Console Vault
To install, simply remove the factory screws from the front area of the console. Slide your new Console Vault into the existing console tub, and re-screw the bolts you removed originally. Once your replace the screws, the Console Vault is now securely mounted to your vehicle’s metal body. Below the factory plastic console tub, there is a steel mounting bracket with welded nut plates. These 2 screws (sometimes 4 depending on the vehicle) attach through this mounting bracket, providing plenty of security. That’s it! In 10 to 15 minutes you now have security for your valuables.
The Dodge Console Vault is easily installed in approx 10 -15 mins. No special tools are needed, nor do you have to pay someone to install it. The following photographs show the Dodge Console Vault being installed in a 2008 Dodge Ram Quad Cab.
The Dodge Console Vault is custom made to fit in the existing OEM lower console tub. No special tools are needed.
When you look inside your OEM tub you will see 4 screws, one in each corner. These are all you have to remove and replace. No drilling or modifications are required.
This is the OEM screw that is found in each corner of the existing console tub.
Simply use a phillips screwdriver to unscrew the OEM screw.
Once the screws are removed, your Dodge Console Vault is ready to install.
Slide the Dodge Console Vault into place. The Console Vault is customized to the size of the existing opening.
Once the Dodge Console Vault is slid into place, open to the vault door.
Use your hand to make sure the Dodge Console Vault is fully seated against the bottom of the OEM lower tub.
Since the Console Vault is a custom it, you may have push down on the front section to make sure it is properly seated.
Once seated, your should be able to run your finger across the front of the exisiting OEM tub ridge and run it back across the front lip of the Dodge Console Vault.
The Console Vault should be flush, or a little bit lower of the front ridge of the OEM tub.
Once seated, you do not use the old OEM bolts (in the center). They are too short, and are to be replaced with the included bolts.
The existing OEM tub, along with your new Dodge Console Vault are secured to the frame of the truck, which is underneath the OEM tub.
You place the bolts in each hold and begin the thread process with your fingers until snug.
Final tightening will be required with a wrench. Tighten down untill the bolt is flush with the bottom of the Dodge Console Vault.
Since the Console Vault is now bolted to the truck frame, it is provided additional anti-theft protection needed from the opportunistic thief.
The only thing left to do is reset the combination. This is each to do and the instructions are provided in the vault.
This shows the final installation photo of the Dodge Console Vault under the middle bench seat.
The Console Vault is well made, and looks like it came standard from the factory.
Above Photograph of a 2006-2012 Dodge Ram Console Vault
Dodge Truck Console Vault Model Numbers
Console Vaults are specifically customized for the following vehicle applications. Note: Console Vaults are made to fit specific year, make and models of vehicles. Please check chart for your vehicle.
Under Middle Bench Seat Console Vault
Center Console with Bucket Seats WITHOUT cd player
This is the only audio CD on the market that completely covers the topic of theft prevention while traveling. This information rich program providing advice and tips on how to outfox professional thieves and protect your luggage, laptops, briefcases or purses while on the road.