Lossless Rewind Wallet – Removable Retractable Cable- use the wallet with or without the retractable security cable
This Duo Lossless Wallet is designed to stay with you, no matter how extreme the situation. This wallet makes an ideal partner in busy urban life, or while traveling.
Rewind Security Wallet System
Until now, the only solution for keeping your wallet attached to you, was a chain wallet. The retractable cable security wallet is the new solution for wallet security. The rewind wallet, also known as a retractor wallet features a retention rewind cable system.. This wallet's security cable extends up ti a length if 27 inches (70cm), which allows the wallet to be extracted and utilized without inconvenience. The steel braid wallet security cable also has a nylon safety coating making it safety friendly. The Rewind Wallet Security System is always spring loaded into its housing, leaving only the belt locking device exposed.
The purpose of the Rewind Security System is to keep the wallet securely attached to you or your personal gear.
The Civilian Labs Rewind Security System features a high-strength, spring-loaded reel which is built into a compact 35mm housing which is made from high-impact ABS plastic. The reel holds 2 feet of thick 1mm plastic coated steel cable. Fitted with twin spring-gate, swiveling carabiners, it clips to the included wallet with its included leather connector.
The retractable cable can be disconnected from the wallet and used independently for holding keys, a knife, or other small tools. The wallet security reel holds 170g before extending.
Video Demonstration of the Rewind Security Wallet with Cable
This wallet design is great when you're highly active and concerned about loosing your wallet and it's the ideal security wallet for thwarting pickpockets.
An example of someone using this retractable cable wallet is while riding a motorcycle or bicycle. As you pedal, the movement of your pants across the seat can cause the wallet to dislodge and fall out. This wallet design is great for when you place your wallet in your rear pocket.
By using the Andorra Rewind Duo Wallet, the wallet may still fall out, however its security cable automatically retracts the wallet back to your belt.
The Rewind Wallet Security System’s cable is made of 0.8mm stainless steel braid. On each end of the cable system are carabiner clips. You attache one end attached to the wallet and the other to your pant belt loop, button hole or bag strap. Each end of the carabiner clips swivel and have spring-gate clasps.
The stainless steel braid (0.8mm diameter) extends 27½ inches (70cm) from the wallet, allowing you to use the wallet comfortably. The braid also has a nylon safety coating making it safety friendly. The security cable of the Civilian Andorra Rewind Wallet is always spring loaded into its housing, leaving only the belt locking device exposed.
Rewind Security Wallet Design Features
The Rewind Wallet, also known as a retractable chain wallet, is made from high quality distinctive leather. It is designed for the active and adventurous user. The action leather is perforated, polyurethane coated and water resistant.
The design of the Andorra Rewind Duo Lossless Wallet is the popular tri-fold style which conveniently folds up into itself.
Rewind Security Wallet Material
The Rewind Duo is hand crafted of perforated, water-shedding leather.
The Rewind wallet is a great travel wallet with superb style and a great present for those who alternate between wild adventures and daily urban life.
When you see this material for the first time, its quality craftsmanship suggests the smart, progressive design of rugged modern looking motor racing materials.
The security wallet’s leather material is also polyurethane coated which makes it highly water resistant and easy to clean with water and sponge. It is also resistant to sweat and other liquids. It will last for many years without showing wear. The perforations are included for a sporty look but also add ventilation to allow the wallet and contents to dry faster and reduce the weight somewhat should it get wet.
“Fuel Gage” Quick Cash Check Alert Window
The Rewind Duo security wallet features a rear panel "fuel gage" indicator which is a clear molded window on the outside of the wallet. This window allows you to do a discrete and quick visual check of your wallet to tell whether you have cash, not a good practice in crowds.
It is also a great way to quickly count foreign currency while traveling without opening your wallet in public places. Simply stagger the bills vertically in the wallet when you insert them, then look through the window and count the stripes.
Credit Card Compartments
The wallet has five individual, standard size credit card compartments and can hold ten credit cards within those slots.
Three are located on the left panel and two on the middle panel. The left flap of the wallet contains 5 standard size credit card slots. The credit card slots are 3 ¼ inches wide.
Identification Compartment
The center panel of the Civilian Lab Andorra Rewind Wallet contains the identification card compartment. The I.D. window is made of a translucent mesh, as opposed to the standard P.V.C. sheets. This material was used to prevent the window from peeling the ink off un-laminated documents. Additionally, the mesh won’t crack or shrink like the PVC window material found in other wallets.
Currency Compartment
The primary compartment is 8 inches long and 4 inches high. It holds 10 to 13 domestic and/or international oversize currency bills, notes, receipts, or other paper items.
The cable reel features two carabiners and leather belt loop both custom embossed with the civilian lab logo.
To use the Civilian Lab Andorra Rewind Wallet
Simply attach the one end of the Lossless Rewind Duo wallet’s security clips to a belt loop, button whole, or bag. The security belt clip stays attached by using a carabiner type device. Once attached, simply slide your wallet into your pants pocket.
The Rewind Lossless Wallet’s security cable will automatically extend itself, allowing for the wallet to be placed in the pocket. The wallet’s security cable keeps constant tension once it is extracted from the wallet.
If you wish to remove the wallet from the Rewind Security System, simply unhook the carabiner clip from the wallet.
Rewind Security Wallet Specifications
Size: 4.4 x 0.4 x 3.2 inches
Weight: 3.8 ounces
Color: Black leather
Wallet Fastener: The wallet is held closed by dual magnetic clasps.
Rewind Security System Retractor Specifications
Retractor Diameter: 1/2 inch (5cm)
Retractor Type: Hubless, Spiral Spring Retractor, 35mm in diameter
Retractor Cable: Diameter thickness of 0.8mm., and 27 ½ inches (70cm) in length. Stainless steel braid with nylon safety coating.
Retractor Biner Clip: Both security clasps are chrome plated, swivel, and are secured by a wire gate spring carabineers.
Weight: 35 grams
Anti-Theft Wallet
For added security in areas prone to pickpockets, it is recommended that you carry your wallet in your front pocket.
This photo shows the wallet being carried in the front pocket with the security system secured to a belt loop.
Retractor device detached from the wallet and shown here hooked to a belt and holding a pocket knife (knife not included).
Rewind Security Wallet System detached from the wallet and clipped to a pocket knife (knife not included).
Rewind Security Wallet System
.jpg)
